Waders presents the microcomputer based Automatic Water Pump Controller to ON and OFF the water pump, automatically as required. This ultimate water filling system takes care of your daily water filling requirements. It is available in various models to cover full range of water pumps from single phase domestic pumps to three phase domestic/industrial pumps. The controller is installed with your existing starter.

Automatic Water Pump Controller can also be used to remove sewage/used water from the storage tanks in the basements. A special over/under voltage cutout can also be in co-operated for the maximum protection [on request].

  
Silent Features

The primary function of the system is to make the user free of all his daily water filling requirements. It will start & stop the water pump automatically.
• All the operational status messages are displayed digitally through 7 segment display.
• Easy to control auto and manual mode.
• It monitors minimum & maximum levels in the tank. The pump is switched ON, when water level goes below minimum level. And pump is switched OFF, when tank gets full. So that, there is no chance of over flowing.
• It can also be used in dual tank systems, when it is required to monitor the ground tank as well as the over head tank.

• It can also be used to remove water from the storage tanks.
• Models available from any single or three phase pump. EXCLUSIVE MODEL FOR SINGLE PHASE SUBMERSIBLE PUMP IS ALSO AVAILABLE.
• With the help of two sensors, it keeps an eye on the inlet water supply as well as over head tank.
• As soon as it senses water at the inlet, pump is switched ON. So the user does not have to worry about the arrival of the water supply hence there will be no chance of dry running of the pump.
• The whole process is completely automatic, Waders Automatic Water Pump Controller helps in saving water and electricity, as well as it enhances the life of the water pump.
• The unit comes with one year warranty.      

Automatic Controller Relay for Three Phase Pump with LCD Display - Model WLG-110TP

- Indicates the level of over head tank. Indicates 25%, 50% and FULL, according to the level in tank.
- All the operational states are displayed by LCD.
- Easy to control Auto and Manual mode.
- Monitors ground tank or incoming supply.
- Monitors minimum and maximum level in the over head tank.
- No chance of dry running or over flowing.
- It can also be used to remove water from the storage tanks.
- Models available for any single or three phase pump.
- Saves water and electricity, as well as, reduces the trouble of daily water filling process.

 

Automatic Controller Relay with SMS Facility - Model WLG110SMS

All the features of WLG110-L, in addition of the following,
- Indicates the level of over head tank. Indicates 25%, 50% and FULL, according to the level in tank.
- Sends SMS on every change in the level status, to the group of users.
- 5 mobile numbers can be entered, to receive and send SMS.
- Individual user can enquire about the system status by sending STATUS SMS to the system.

Automatic Controller Relay for Multiple Tanks and Level Controller - WLG110MT

All the features of WLG110-L, in addition of the following,
- Monitors multiple tanks that are filled by a single pump.
- Models available to monitor up to 10 tanks.

Automatic Controller Relay for Submersible Pump Starter - SUB110

- The complete operation of submersible pump is controlled by  this compact unit.
- All operational status are displayed through 7 segment displays.
- Easy to control auto and manual mode
- In Manual Mode, pump is controlled by Start & Stop pushbuttons.
- While the pump is not running in Manual Mode, unit displays ‘OFF' to show that pump is off.
- The unit digitally displays incoming voltage and current, while the pump is running.

 
   
   
 Downloads , Dealership Enquires , Site Map , Careers , Terms of Use , Guarantee/Warrantee                               WADERS is a registered trademark of WADERS Power Control, India.